Self - Contained Air Breathing apparatus are very essential for heavy toxic leaks. Manufactured as per IS: 10245, Part-II. Available in 30 minutes or 45 minutes duration with all Test Certificates.
Safety Device
༒★✿ Safety Devices ✿★༒
Chlorine Cylinder Emergency kit
Emergency General Tool Kit to stop gas leakage from Tonner / Cylinder inclusive of all the parts as per our catalogue (detailed in separate part list ) collectively packed in steel box size: 36” X 16” X 11” weighting 70 K. g. approximately (Use for Hazardous Gas i.e. Chlorine, Ammonia & Sulfur Dioxide etc.)
Leak Absorption System
The blower shall suck the leaked chlorine gas along with air and deliver the same to the Absorption Tower. The Pump shall pump the 20% caustic solution to the top of the Tower. The caustic flows down through the Pall Ring dumped packing. The chlorine gas that flows up, meets the caustic counter-currently in the packing area. Chlorine is absorbed in this process.
Chlorine Leak detector Single Sensor & Double Sensor
The Chlorine gas detection system consists of a control unit and a sensor. The Sensor mounted remotely senses the gas present in the room, which is indicated on the panel. Apart from the audio visual alarm present in the panel, there is a potential free contact which can be used to trigger a remote alarm or actuate the exhaust fan.
Canister Gas Mask
The Gas Mask with Canister is designed to enable the wearer to breathe fresh air in a contaminated atmosphere. These are applicable for small leaks only. The gas mask incorporates exclusive design features conforming to IS: 8523: 1977. Canister type respirators must never be used in atmosphere containing less than 16% oxygen.
Protective Clothing
It consists of Full Face Masks, PVC Suit, PVC Gloves and Gum Boots, Safety Helmet, Goggles.