Shital Enterprise is one of the top manufacturers, suppliers, providers, designers, and commissioners of chlorinator system accessories in Mumbai, Navi Mumbai, and Thane throughout India because we place a premium on quality. For the safe handling of chlorine containers, the lifting beam is absolutely necessary. A dynamometer can also be used to raise this and weigh the tonne container. It is constructed with a robust steel hook and ISMC 125. Hold the hook with a high tension bolt. 03 tonnes is the maximum load it can support. The Trunnion Roller Support facilitates easy rotation of the tonne container for positioning the gas valve as well as proper placement of tonners. The tonners must be positioned so that both valves are vertically aligned. In an emergency, the roller support helps the tonner rotate. To prevent damage to the container valve, an additional valve assembly is mounted with a yoke. It takes away the chance that the damaged container valve will cause a leak. Cylinder, Tonner, Header, and Chlorinator are used with the flexible copper connector to create the necessary connection.

The standard length of this connector is 1.5 meters. with end fittings appropriate for a valve on a tonne container. End connectors with silver brazing provide lengthy, corrosion-free service. Isolation valve assemblies should be used on all container connections, it is highly advised. This will extend the lifespan of the flexible connectors and significantly lower the likelihood of chlorine leaks. Additionally, air and moisture are kept out of the flexible connectors and manifold piping by means of isolation valves. Allowing moisture into the manifold, which typically occurs during container changes, can result in serious corrosion inside the manifold, which then leads to equipment failures and additional maintenance.